Door coordinator for double doors: for D5200 door closers

The CISA coordinator ensures double doors always shut in the right sequence and that fire doors in particular close correctly and securely.

The coordinator can be installed on CISA D5200 door closers and is suitable for all applications. The range includes one version for pull doors and another for push doors, offering maximum versatility and a safe and reliable solution for end users.

The accessories supplied with the coordinator cover all kinds of installations, so locksmiths have everything they need to mount the device.

Available in the following finishes:

SILVER RAL 9006 (codice 97)

WHITE RAL 9010 (codice 45)

DARK BROWN RAL 7043 (codice 88)

BLACK RAL 9005 (codice 44)

TECHNICAL FEATURES

Version for right and left hand pull doors:

  • Side of active leaf (right / left) can be chosen at installation
  • Maximum opening angle 175° (depending on the door profile and frame used)
  • Minimum width of inactive leaf 360 mm
  • Distance between the hinges 1495 mm - 2640 mm.
  • For smaller distances (1370 mm - 1490 mm), the profile of the active leaf can be reduced to 130 mm.
  • The device can be installed directly onto the door or using the plates supplied.

 

Version for right or left hand push doors:

  • Maximum opening angle 110° (depending on the door profile and frame used)
  • Minimum width of inactive leaf 600mm
  • Distance between the hinges 1440 mm – 2500 mm.

The device can be installed directly onto the door or using the plates supplied.

SUPPLIED AS STANDARD

The accessories supplied with the coordinator cover all kinds of installations, so locksmiths have everything they need to mount the device.

Use the arm provided with the coordinator to connect the door closer.

DO NOT USE THE ARM SUPPLIED WITH THE DOOR CLOSER BUT THE ONE IN THE COORDINATOR KIT

FINISHES

Standard

  • Fin. 97 Aluminium

 

Available finishes

  • Fin. 88 Dark brown
  • Fin. 44 Black
  • Fin. 45 White

NORMATIVE

  • CE marking in compliance with EN 1154
  • CE marking in compliance with EN 1158